LGL Feeder Spin1

1 - GENERAL FEATURES
SPIN1 is a yarn accumulator featuring separate coils suitable for all types of knitting machines or textile machines requiring constant tension yarn feed-in.

Operational Features:

• Quick reaction to machine speed changes without causing tension peaks on the yarn
• Quick reaction to set tension changes.
• Yarn tension adjustment from 0.5g to 100g.
• Maximum torque available at low speeds, too
• Special concern for reduction of energy consumption
• Yarn absorption measurement
• Easy installation and use
• RS485 and CAN BUS serial communication option
• Connections: via flat cable or traditional cable
• Ceramic tension sensor: guarantees accuracy, precision and quick response

Technical Specifications:

• Power supply voltage data: V = From 24VDC ± 10% to 60VDC ± 10% (min 21,6 VDC - max 66 VDC)
• Average power in normal operation: 5W-15W (much relying on the type of work process)
• Peak power: 70W
• Automatic speed adjustment up to a maximum value of 1400 m/min.
• Coil separation feature from 0 to 2mm.
• A-weighted sound pressure level, at maximum speed, < than 70dB (A)
• Operation and storage conditions: Room temperature: +10 to +40 °C
• Max. humidity: 80%

2 - INSTALLATION
Spin1 can be install with 2 version Flat cable or single cable version. depend on your applicant.

Flat cable version:

• Max 128 devices per 1 power kit.
• Using with Spin1 clamp.
• Easy to install.

Single cable version:

Only use for small applicant which required less than 12 Spin1.

• Max 12 devices per 1 power kit.

3- SETTING THE OPERATING PARAMETERS

The Spin1 can be manual setting following user manual or by computer by LAN cable or WiFi with KYC device.

• Manual setting: we need to set one by one, using the button on Spin1.
• By computer : can be set one by one or group. using LAN cable or WiFi.